氨基功能化硅砂对含磷污水吸附效果

    Adsorption Effect of Amino-functionalized Silica Sand on Phosphorus-containing Wastewater

    • 摘要: 通过包覆、功能化的硅砂,使得硅砂的吸附效率得到大幅度提升,开展关于含磷废水中磷物质的静态和动态吸附实验,分析氨基功能化硅砂的静态和动态吸附效果,并通过FT-IR实验分析氨基功能化硅砂对磷的吸附机理。结果表明:将初始溶液浓度定为0.5 g/L,吸附温度定为60 ℃,吸附剂颗粒直径定为0.5~1.0 mm,吸附时间定为16 h,氨吸附剂掺量定为8 g/L时,静态吸附效果较佳。氨基功能化的硅砂移动速率定为4.5 cm/h,初始溶液浓度定为1.0 g/L,吸附层高度定为60 cm,污水流动速率定为0.15 L/h时动态吸附效果较佳且经济。

       

      Abstract: The adsorption efficiency of silica sand was greatly improved by coating and functionalized silica sand. The static and dynamic adsorption tests of phosphorus substances in phosphorus-containing wastewater were carried out, and the static and dynamic adsorption effects of amino-functional silica sand were analyzed. The adsorption mechanism of amino-functional silica sand on phosphorus was analyzed by FT-IR test.The results showed when the initial solution concentration is 0.5 g/L, the adsorption temperature is 60 ℃, the diameter of adsorbent particles is 0.5~1.0 mm, the adsorption time is 16 h, and the content of amino-functionalized silica sand is 8 g/L. The static adsorption effect is the best. The moving rate of amino-functionalized silica sand is set as 4.5 cm/h, the initial solution concentration is set as 1.0 g/L, the height of adsorption layer is set as 60 cm, and the flow rate of wastewater is set as 0.15 L/h, the dynamic adsorption effect is best and economical.

       

    /

    返回文章
    返回