张晶, 唐鑫, 吕向文, 等. 某矽卡岩型铜硫矿资源综合回收工艺[J]. 矿产综合利用, 2024, 45(3): 150-156. DOI: 10.3969/j.issn.1000-6532.2024.03.023
    引用本文: 张晶, 唐鑫, 吕向文, 等. 某矽卡岩型铜硫矿资源综合回收工艺[J]. 矿产综合利用, 2024, 45(3): 150-156. DOI: 10.3969/j.issn.1000-6532.2024.03.023
    ZHANG Jing, TANG Xin, LYU Xiangwen, et al. Comprehensive recovery process of skarn type copper-sulfur ore resources[J]. Multipurpose Utilization of Mineral Resources, 2024, 45(3): 150-156. DOI: 10.3969/j.issn.1000-6532.2024.03.023
    Citation: ZHANG Jing, TANG Xin, LYU Xiangwen, et al. Comprehensive recovery process of skarn type copper-sulfur ore resources[J]. Multipurpose Utilization of Mineral Resources, 2024, 45(3): 150-156. DOI: 10.3969/j.issn.1000-6532.2024.03.023

    某矽卡岩型铜硫矿资源综合回收工艺

    Comprehensive Recovery Process of Skarn Type Copper-sulfur Ore Resources

    • 摘要: 这是一篇矿物加工工程领域的论文。针对某矽卡岩性铜矿石嵌布粒度较细及有价元素种类多,分别为铜、硫、铁和伴生元素银的特点。比较了铜优先浮选、铜硫混合浮选-铜硫分离两种工艺对资源综合回收的影响,其中铜硫混浮-铜硫分离工艺可以实现铜、硫、银的较好回收,同时磁铁矿有一定回收价值。实验可以得到铜品位24.39%、铜回收率91.68%的铜精矿,硫品位33.10%、硫回收率61.19%的硫精矿。银在铜精矿中得到了富集,银品位185 g/t、银回收率83.21%。浮选尾矿经再磨后磁选可以增加铁精矿回收率,经过两段弱磁选可以得到铁品位56.48%,铁回收率33.84%的铁精矿,该工艺可为同类型矿石选矿提供意见参考。

       

      Abstract: This is an article in the field of mineral processing engineering. For a skarn copper ore, the disseminated particle size is fine, the valuable elements in the ore are Cu, S, Fe and the associated element Ag. Compared with the effects of copper preferential flotation and copper-sulfur mixed flotation-copper-sulfur separation on the comprehensive recovery, the copper-sulfur mixed flotation-copper-sulfur separation process can achieve better recovery of copper, sulfur and silver, and magnetite has a certain recovery value. Copper concentrate with copper grade of 24.39% and copper recovery of 91.68% and sulfur concentrate with sulfur grade of 33.10% and sulfur recovery of 61.19% were obtained by copper sulfur mixed flotation. Ag was enriched in the copper concentrate, with a grade of 185 g/t and Ag recovery of 83.21%. The recovery of iron concentrate can be increased after the regrinding magnetic separation of flotation tailings. With two-stage weak magnetic separation, iron concentrate with iron grade of 56.48% and iron recovery of 33.84% can be obtained. The results can provide a reference for the similar copper sulfide.

       

    /

    返回文章
    返回